Anritsu MS2840A - :DISPlay:SPURious:SEGMent:RESTart?

Chapter 2 SCPI Device Message Detail
2-728
:DISPlay:SPURious:SEGMent:RESTart?
Displayed Restart Query
Function
This command queries whether the remeasurement message is displayed
on the trace.
Query
:DISPlay:SPURious:SEGMent:RESTart?
Response
<switch>
Parameter
<switch>
Message displayed/not displayed
1
Message is displayed.
0
Message is not displayed.
Details
When the sweep has paused and Spurious Emission is set to On, switch
Time Domain Measurement into On. Then the remeasurement
message ,“Please sweep again.”, is displayed.
Example of Use
To query whether the remeasurement message is displayed on the trace.
DISP:SPUR:SEGM:REST?
> 1