Anritsu MS2840A - [:SENSe]:SWEep:EGATe:VIEW:BANDwidth:VIDeo:AUTO?

2.7 Sweep/Trigger/Gate
2-307
2
SCPI Device Message Details
Parameter
<switch>
Automatic setting
0|OFF
Disables the automatic setting.
1|ON
Enables the automatic setting (Default).
Details
This command is not available when Gate View is set to Off.
Example of Use
To enable the automatic setting for VBW.
SWE:EGAT:VIEW:BAND:VID:AUTO ON
[:SENSe]:SWEep:EGATe:VIEW:BANDwidth:VIDeo:AUTO?
Gate View Video Bandwidth Auto/Manual Query
Function
This command queries the automatic video bandwidth (VBW) setting for
Gate View.
This parameter and the one for automatically setting the VBW for time
axis measurement reference the same value.
Query
[:SENSe]:SWEep:EGATe:VIEW:BANDwidth:VIDeo:AUTO?
Response
<switch>
Parameter
<switch>
Automatic setting
0
Disables the automatic setting.
1
Enables the automatic setting.
Example of Use
To query the automatic video bandwidth setting for Gate View.
SWE:EGAT:VIEW:BAND:VID:AUTO?
> 1