Anritsu MS2840A - :DISPlay:WINDow[1]:TRACe:Y[:SCALe][:LOGarithmic]:PDIVision?

Chapter 2 SCPI Device Message Details
2-64
:DISPlay:WINDow[1]:TRACe:Y[:SCALe][:LOGarithmic]:PDIVision?
Log Scale Range Query
Function
This command queries the Y-axis scale magnification when Scale Mode is
set to Log.
Query
:DISPlay:WINDow[1]:TRACe:Y[:SCALe][:LOGarithmic]:PDIVisi
on?
Response
<rel_ampl>
Parameter
<rel_ampl>
Y-axis scale magnification
0.1
0.1 dB/div
0.2
0.2 dB/div
0.5
0.5 dB/div
1
1 dB/div
2
2 dB/div
5
5 dB/div
10
10 dB/div
20
20 dB/div
Example of Use
To query the scale magnification.
DISP:WIND:TRAC:Y:PDIV?
> 0.5
Related command
This command has the same function as the following commands.
:DISPlay:ACPower:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:PDIVi
sion?
:DISPlay:CHPower:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:PDIVi
sion?
:DISPlay:OBWidth:VIEW[1]:WINDow[1]:TRACe:Y[:SCALe]:PDIVi
sion?
:DISPlay:SEMask:WINDow[1]:TRACe:Y[:SCALe]:PDIVision?
:DISPlay:BPOWer|:TXPower:VIEW[1]:WINDow[1]:TRACe:Y[:SCAL
e]:PDIVision?