2
SCPI Device Message Details
Example of Use
To query the measurement method for Occupied Bandwidth
measurement.
OBW:METH?
> XDB
Related command
This command has the same function as the following command.
:CALCulate:OBWidth:METHod?
:CALCulate:OBWidth:METHod NPERcent|XDB
OBW Method
Function
This command sets the measurement method for Occupied Bandwidth
measurement.
Refer to
[:SENSe]:OBWidth:METHod.
Related command
This command has the same function as the following command.
[:SENSe]:OBWidth:METHod NPERcent|XDB
:CALCulate:OBWidth:METHod?
OBW Method Query
Function
This command queries the measurement method for Occupied
Bandwidth measurement.
Refer to
[:SENSe]:OBWidth:METHod?.
Related command
This command has the same function as the following command.
[:SENSe]:OBWidth:METHod?
To Next Page
Loading...
