Anritsu MS2840A - [:SENSe]:SEMask:FILTer[:RRC][:STATe] ON|OFF|1|0

2.13 Spectrum Emission Mask
2-687
2
SCPI Device Message Details
[:SENSe]:SEMask:FILTer[:RRC][:STATe] ON|OFF|1|0
Spectrum Emission Mask Root Nyquist Filter State
Function
This command sets the filter type for Spectrum Emission Mask
measurement.
Command
[:SENSe]:SEMask:FILTer[:RRC][:STATe] <filter>
Parameter
<filter>
Filter type
OFF|0
Rectangle filter
ON|1
Root Nyquist filter (Default)
Example of Use
To set the filter type to Root Nyquist.
SEM:FILT 1
Related command
This command has the same function as the following command.
[:SENSe]:SEMask:FILTer:TYPE