Anritsu MS2840A - SRCHTH;SRCHTH?

Chapter
４
Native Device Message Details
4-310
SRCHTH/SRCHTH?
Peak Search Mode
Function
This command specifies the detection mode for the threshold value (Peak
Search Threshold Level) in peak point detection.
Command
SRCHTH mode
Query
SRCHTH?
Response
mode
Parameter
mode
Threshold value detection mode
OFF
Detects full range (No range limit).
ON
Sets the detection limit to ON.
ABOVE
Detects only in the range above the threshold
value.
BELOW
Detects only in the range below the threshold
value.
Details
This command is not available during the Spurious Emission
measurement and when Displayed Segment Mode is set to Auto.
Not available during Spectrum Emission Mask measurement.
Example of Use
To detect the peak point from the data greater than the threshold value:
SRCHTH ABOVE
SRCHTH?
> ABOVE