2
SCPI Device Message Details
[:SENSe]:ACPower:CARRier[1]:FILTer:TYPE RECT|NYQuist|RNYQuist
Adjacent Channel Power Filter Type
Function
This command sets the filter type of the carrier for Adjacent Channel
Power measurement.
Command
[:SENSe]:ACPower:CARRier[1]:FILTer:TYPE <filter>
Parameter
<filter>
Filter type
RECT
Rectangle filter
NYQuist
Nyquist filter
RNYQuist
Root Nyquist filter (Default)
Example of Use
To set the filter type for ACP measurement to Nyquist.
ACP:CARR:FILT:TYPE NYQ
Related command
This command has the same function as the following command.
:CALCulate:ACPower:CARRier[1]:FILTer:TYPE
:CALCulate:ACPower:CARRier[1]:FILTer:TYPE RECT|NYQuist|RNYQuist
Adjacent Channel Power Filter Type
Function
This command sets filter type of the carrier for Adjacent Channel Power
measurement.
Refer to
[:SENSe]:ACPower:CARRier[1]:FILTer:TYPE.
Related command
This command has the same function as the following command.
[:SENSe]:ACPower:CARRier[1]:FILTer:TYPE
To Next Page
Loading...
