Anritsu MS2840A - [:SENSe]:ACPower:ADVanced:OFFSet:FILTer:TYPE RECT|NYQuist|RNYQuist,RECT|NYQuist|RNYQuist,RECT|NYQuist|RNYQuist,RECT|NYQuist|RNYQuist,RECT|NYQuist|RNYQuist,RECT|NYQuist|RNYQuist, RECT|NYQuist|RNYQuist,RECT|NYQuist|RNYQuist

2.9 ACP
2-395
2
SCPI Device Message Details
[:SENSe]:ACPower:ADVanced:OFFSet:FILTer:TYPE
RECT|NYQuist|RNYQuist,RECT|NYQuist|RNYQuist,RECT|NYQuist|RNYQui
st,RECT|NYQuist|RNYQuist,RECT|NYQuist|RNYQuist,RECT|NYQuist|RNYQ
uist, RECT|NYQuist|RNYQuist,RECT|NYQuist|RNYQuist
Adjacent Channel Power Offset Filter Type
Function
This command sets offset filter for Adjacent Channel Power
measurement.
Command
[:SENSe]:ACPower:ADVanced:OFFSet:FILTer:TYPE
<mode_1>,<mode_2>,<mode_3>,<mode_4>,<mode_5>,<mode_6>,<m
ode_7>,<mode_8>
Parameter
<mode_n>
Filter type of Offset_n
RECT
Rectangular filter
NYQuist
Nyquist filter
RNYQuist
Root Nyquist filter (Default)
Details
This function can be set when the following trace is active.
•
Spectrum
To query the measurement results after executing this command, use the
*WAI command to control synchronization.
Example of Use
To set ACP measurement offset channel filter type to Nyquist and query
result.
ACP:ADV:OFFS:FILT:TYPE NYQ,NYQ,NYQ,NYQ,NYQ,NYQ,NYQ,NYQ
*WAI
FETC:ACP?