Anritsu MS2840A - 2.18 Other Settings

2.18 Other Settings
2-949
2
SCPI Device Message Details
2.18 Other Settings
Table 2.18-1 lists device messages for other settings.
Table 2.18-1 Device Messages for Other Settings
Function Device Message
Measurement
Status Query
:STATus:ERRor?
Uncal Status
Query
:STATus:UNCal?
Erase Warm Up
Message
:DISPlay:ANNotation:WUP:ERASe
Display Uncal
Message
:DISPlay:ANNotation:UNCal[:STATe] ON|OFF|1|0
:DISPlay:ANNotation:UNCal[:STATe]?
Display Title
:DISPlay:ANNotation:TITLe[:STATe] ON|OFF|1|0
:DISPlay:ANNotation:TITLe[:STATe]?
Title Entry
:DISPlay:ANNotation:TITLe:DATA <string>
:DISPlay:ANNotation:TITLe:DATA?
Pre-selector Auto
Tune
:CALibration:YTF
:CALibration:YTF?
Pre-selector Tune
[:SENSe]:POWer[:RF]:PADJust <freq>
[:SENSe]:POWer[:RF]:PADJust?
Adjust Reference
Clock
:CALibration:RCLock[:VALue] <integer>
:CALibration:RCLock[:VALue]?
Adjust Reference
Clock Preset
:CALibration:RCLock[:VALue]:PRESet
Micro Wave
Preselector Bypass
[:SENSe]:POWer[:RF]:MW:PRESelector[:STATe] ON|OFF|1|0
[:SENSe]:POWer[:RF]:MW:PRESelector[:STATe]?