Anritsu MS2840A - GATESOURCE;GATESOURCE?

Chapter
４
Native Device Message Details
4-108
GATESOURCE/GATESOURCE?
Gate Source
Function
This command sets the gate signal source.
Command
GATESOURCE source
Query
GATESOURCE?
Response
source
Parameter
source
Gate signal source
[MS269xA]
WIDEVID
Wideband IF detection (Wide IF Video)
EXT
External input (External)
SG
SG marker
BBIF
Baseband Interface (BBIF)
[MS2830A], [MS2840A]
WIDEVID
Wideband IF detection (Wide IF Video)
EXT
External input (External)
SG
SG marker
FRAME
Frame period trigger
Details
[MS269xA]
SG marker trigger can be selected only when the Option 020/120 Vector
Signal Generator is installed.
BBIF trigger cannot be selected only when the Option 040/140 Baseband
Interface Unit is not installed or the software package is Ver.6.00.00 or
later.
[MS2830A], [MS2840A]
SG marker trigger can be selected only when the Option 020/120/021/121
Vector Signal Generator is installed.
Example of Use
To set the gate signal source to wideband IF detection.
GATESOURCE WIDEVID
GATESOURCE?
> WIDEVID