Anritsu MS2840A - [:SENSe]:SWEep:EGATe:DELay <time>; [:SENSe]:SWEep:EGATe:DELay?

2.7 Sweep/Trigger/Gate
2-299
2
SCPI Device Message Details
[:SENSe]:SWEep:EGATe:DELay <time>
Gate Delay
Function
This command sets the delay time to start the gate sweep.
Command
[:SENSe]:SWEep:EGATe:DELay <time>
Parameter
<time>
Delay time to start the gate.
Range 0 to 1 s
Resolution 20 ns
Suffix code NS, US, MS, S
S is used when omitted.
Example of Use
To set the gate delay time to 20 ms.
SWE:EGAT:DEL 20MS
[:SENSe]:SWEep:EGATe:DELay?
Gate Delay Query
Function
This command queries the delay time to start the gate sweep.
Query
[:SENSe]:SWEep:EGATe:DELay?
Response
<time>
Parameter
<time>
Delay time to start the gate.
Range 0 to 1 s
Resolution 20 ns
Suffix code None. Value is returned in s units.
Example of Use
To query the gate delay time.
SWE:EGAT:DEL?
> 0.02000000