Chapter 2 SCPI Device Message Details
2-306
[:SENSe]:SWEep:EGATe:VIEW:BANDwidth[:RESolution]?
Gate View Resolution Bandwidth Query
Function
This command selects the resolution bandwidth (RBW) for Gate View.
This parameter and the one for setting the RBW for time axis
measurement reference the same value.
Query
[:SENSe]:SWEep:EGATe:VIEW:BANDwidth[:RESolution]?
Response
<freq>
Parameter
<freq>
Resolution bandwidth (RBW)
[MS269xA]
Range/Resolution 30 Hz to 31.25 MHz
However, the settable value is 30 Hz to 3 MHz
(for 1 to 3 sequences), 50 kHz, 5 MHz, 10 MHz,
or 20 MHz, or 31.25 MHz.
[MS2830A], [MS2840A]
Range/Resolution 30 Hz to 31.25 MHz
However, the settable value is 30 Hz to 3 MHz
(for 1 to 3 sequences), 500 Hz, 50 kHz, 2 MHz, 5
MHz, 10 MHz, 20 MHz, or 31.25 MHz.
[Common]
Suffix code None. Value is returned in Hz units.
Example of Use
To query the RBW.
SWE:EGAT:VIEW:BAND?
> 3000
[:SENSe]:SWEep:EGATe:VIEW:BANDwidth:VIDeo:AUTO ON|OFF|1|0
Gate View Video Bandwidth Auto/Manual
Function
This command automatically sets the video bandwidth (VBW) for Gate
View.
This parameter and the one for setting the VBW for time axis
measurement reference the same value.
Command
[:SENSe]:SWEep:EGATe:VIEW:BANDwidth:VIDeo:AUTO <switch>
To Next Page
Loading...
