Anritsu MS2840A - :MEASure:BATCh:SPURious[n]? <filename>[,<device>]

Chapter 2 SCPI Device Message Detail
2-888
:MEASure:BATCh:SPURious[n]? <filename>[,<device>]
Spurious Emission Batch Measure
Function
This command executes Spurious Emission measurement and outputs
the measurement result after the parameters described in the specified
parameter list file have been set.
Query
:MEASure:BATCh:SPURious[n]? <filename>[,<device>]
Response
The same value as for
:MEASure:SPURious[n]?
is returned.
Refer to
:MEASure:SPURious[n]?
for details.
Parameter
<filename>
Parameter list file
Specify with any character string enclosed by
double quotes (" ") or single quotes (' ').
<device>
Drive name
A,B,D,E,F,...
D drive is used when omitted.
Details
SPURious Emission measurement is executed and the result is output
after the parameters described in the specified parameter list have been
set.
The return values of this function vary depending on the result mode.
(cf.
:SYSTem:RESult:MODE
)
Place the parameter list files in the following folder on the specified
drive.
<device>:\Anritsu Corporation\Signal Analyzer\User Data\Batch
If the parameter list file has been changed, the changes must be applied
with the
:MMEMory:RELoad:BATCh
command.
(cf.
:MMEMory:RELoad:BATCh
)