Anritsu MS2840A - :CALCulate:MARKer:TABLe[:STATe] OFF|ON|0|1; :CALCulate:MARKer:TABLe[:STATe]?

Chapter 2 SCPI Device Message Details
2-122
:CALCulate:MARKer:TABLe[:STATe] OFF|ON|0|1
Marker List
Function
This command selects the marker list display On/Off.
Command
:CALCulate:MARKer:TABLe[:STATe] <switch>
Parameter
<switch>
Marker list display On/Off
ON|1
Sets the marker list to On.
OFF|0
Sets the marker list to Off.
Details
This command is not available when the Measure function is set to On
and during the Spurious Emission measurement.
Example of Use
To the marker list display to On.
CALC:MARK:TABL ON
:CALCulate:MARKer:TABLe[:STATe]?
Marker List Query
Function
This command queries the On/Off state of the marker list display setting.
Query
:CALCulate:MARKer:TABLe[:STATe]?
Response
<switch>
Parameter
<switch>
Marker list display On/Off
1
Marker list is set to On.
0
Marker list is set to Off.
Example of Use
To query the On/Off state of the marker list display setting.
CALC:MARK:TABL?
> 1