Anritsu MS2840A - [:SENSe]:SPURious[:RANGe][:LIST]:AVERage:COUNt <integer_1>,<integer_2>,<integer_3>,<integer_4>,<integer_5>,<integer_6>,<integer_7>,<integer_8>,<integer_9>,<integer_10>,<integer_11>,<integer_12>,<integer_13>,<integer_14>,<integer_15>,<integer_16>,<int...

2.14 Spurious Emission Measurement Function
2-769
2
SCPI Device Message Details
[:SENSe]:SPURious[:RANGe][:LIST]:AVERage:COUNt
<integer_1>,<integer_2>,<integer_3>,<integer_4>,<integer_5>,<integer_6>,<
integer_7>,<integer_8>,<integer_9>,<integer_10>,<integer_11>,<integer_12>
,<integer_13>,<integer_14>,<integer_15>,<integer_16>,<integer_17>,<integ
er_18>,<integer_19>,<integer_20>
Spurious Emission Storage Count
Function
This command sets the storage count of each segment.
Command
[:SENSe]:SPURious[:RANGe][:LIST]:AVERage:COUNt
<integer_n>
Parameter
<integer_n>
Storage count of Segment n
Range 1 to 9999
Resolution 1
Default 10 times
Example of Use
To set the storage count of each segment.
SPUR:AVER:COUN
10,10,10,20,20,5,5,5,5,5,5,5,10,10,10,10,10,10,10,10