Anritsu MS2840A - SEM:OFFS:LIST:SWE:TIME:AUTO:MODE;SEM:OFFS:LIST:SWE:TIME:AUTO:MODE?

Chapter
４
Native Device Message Details
4-250
SEM:OFFS:LIST:SWE:TIME:AUTO:MODE/SEM:OFFS:LIST:SWE:TIME:AUT
O:MODE?
Spectrum Emission Mask Offset Auto Sweep Time Select
Function
This command sets the Normal/Fast mode in the case that the sweep
time of the offset for Spectrum Emission Mask measurement is Auto.
Command
SEM:OFFS:LIST:SWE:TIME:AUTO:MODE
mode_1[,mode_2[,mode_3[,mode_4[,mode_5[,mode_6[,mode_7[,
mode_8[,mode_9[,mode_10[,mode_11[,mode_12]]]]]]]]]]]
Query
SEM:OFFS:LIST:SWE:TIME:AUTO:MODE?
Response
mode_1,mode_2,mode_3,mode_4,mode_5,mode_6,mode_7,mode_8,
mode_9,mode_10,mode_11,mode_12
Parameter
mode_n
Normal/Fast of sweep time of Offset-n
NORM
Normal sweep time
FAST
High-speed sweep mode
Example of Use
To set the sweep mode in the case that the sweep time of the offset is
Auto.
SEM:OFFS:LIST:SWE:TIME:AUTO:MODE
NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,N
ORM
SEM:OFFS:LIST:SWE:TIME:AUTO:MODE?
>
NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,NORM,N
ORM