Anritsu MS2840A - 3.11 Batch Measure Function Settings

Chapter
３
Native Device Message List
3-52
3.11 Batch Measure Function Settings
Table 3.11-1 lists device messages for setting the Batch Measurement function.
Table 3.11-1 Batch Measure Function Settings
Function Command Query Response Remarks
Reloading Parameter List Files
MMEM:REL:BATC device --- ---
device :
drive name
= D | E | F ...
Adjacent Channel Power Batch
Measure
---
MEAS:BATC:ACP?
n,filename[,device]
Refer to Chapter 4,
“Native Device Message
Details”.
n: 1 | 2
filename:
parameter
list file name
device :
drive name
= D | E | F ...
Occupied Bandwidth Batch
Measure
---
MEAS:BATC:OBW?
n,filename[,device]
Refer to Chapter 4,
“Native Device Message
Details”.
n: 1 | 2
filename:
parameter
list file name
device :
drive name
= D | E | F ...
Spectrum Emission Mask Batch
Measure
---
MEAS:BATC:SEM?
n,filename[,device]
Refer to Chapter 4,
“Native Device Message
Details”.
n: 1 | 7 | 8 | 10 | 11
| 13
filename:
parameter
list file name
device :
drive name
= D | E | F ...
Spurious Emission Batch
Measure
---
MEAS:BATC:SPUR?
n,filename[,device]
Refer to Chapter 4,
“Native Device Message
Details”.
n: 1 to 42
filename:
parameter
list file name
device :
drive name
= D | E | F ...