Anritsu MS2840A - :CALCulate:PMARker:MODE ON|OFF|1|0; :CALCulate:PMARker:MODE?

Chapter 2 SCPI Device Message Details
2-126
:CALCulate:PMARker:MODE ON|OFF|1|0
Power Marker
Function
This command switches the display mode of the marker value.
Command
:CALCulate:PMARker:MODE <switch>
Parameter
<switch>
Display mode of the marker value
ON|1
Integration
OFF|0
Peak
Details
This command is not available during Spurious Emission measurement
and when Displayed Segment Mode is Auto.
Not available during Spectrum Emission Mask measurement.
Example of Use
To the display mode of the marker value to Integration.
CALC:PMAR:MODE ON
:CALCulate:PMARker:MODE?
Power Marker Query
Function
This command queries the display mode of the marker value.
Query
:CALCulate:PMARker:MODE?
Response
<switch>
Parameter
<switch>
Display mode of the marker value
1
Integration
0
Peak
Example of Use
To query the display mode of the marker value.
CALC:PMAR:MODE?
> 1