Chapter 2 SCPI Device Message Detail
2-1010
:MMEMory:STORe:EVENt:TYPE LFAil|LPASs|MFAil|MPASs|SWEep
Event Type
Function
This command sets the event type that triggers the Save on Event
function.
Command
:MMEMory:STORe:EVENt:TYPE <Type>
Parameter
<Type>
Event type
LFAil
Saves a waveform if a Limit evaluation result is
Fail.
(Default)
LPASs
Saves a waveform if a Limit evaluation result is
Pass.
MFAil
Saves a waveform if a Margin evaluation result is
Fail.
MPASs
Saves a waveform if a Margin evaluation result is
Pass.
SWEep
Saves a waveform whenever measurement is
performed, regardless of the Limit evaluation
result.
Example of Use
To set the event type that triggers the Save on Event function to Limit
Pass.
:MMEM:STOR:EVEN:TYPE LPAS
To Next Page
Loading...
