Anritsu MS2840A - :CALCulate:LLINe[1]|2|3|4|5|6:ENVelope:POINt <number>

2.6 Trace
2-229
2
SCPI Device Message Details
:CALCulate:LLINe[1]|2|3|4|5|6:ENVelope:POINt <number>
Envelope Points
Function
This command sets the number of Envelope Points for automatically
creating a Limit Line from the current Trace Point value.
Command
:CALCulate:LLINe[1]|2|3|4|5|6:ENVelope:POINt <number>
Parameter
<number>
The number of Envelope Points
Range 2 to Trace Point (Max 100)
Resolution 1
Default 41
Details
When the Create Envelope function is executed, the set value applies.
Example of Use
To set the number of Envelope Points to 20.
CALC:LLIN:ENV:POIN 20