Anritsu MS2840A - [:SENSe]:SPURious[:RANGe][:LIST]:BANDwidth[:RESolution]?

Chapter 2 SCPI Device Message Detail
2-750
[:SENSe]:SPURious[:RANGe][:LIST]:BANDwidth[:RESolution]?
Spurious Emission Resolution Bandwidth Query
Function
This command queries the resolution bandwidth (RBW) of each segment.
Query
[:SENSe]:SPURious[:RANGe][:LIST]:BANDwidth[:RESolution]?
Response
<bandwidth_n>
Parameter
<bandwidth_n>
Resolution bandwidth (RBW) of Segment n
[MS269xA]
Range/Resolution Value is returned in any of 30 Hz to 3 MHz (1-3
sequence), 50 kHz, 5 MHz, 10 MHz, and 20
MHz.
[MS2830A]
，
[MS2840A]
Range/Resolution Value is returned in any of 30 Hz to 3 MHz (1-3
sequence), 500 Hz, 50 kHz, 2 MHz, 5 MHz, 10
MHz, and 20 MHz.
[Common]
Suffix code None. Value is returned in Hz units.
Details
For MS2830A, MS2840A, RBW 20 MHz or greater is only available for
MS2830A-005/105/007/009/109
，
MS2840A-005/105/009/109.
Example of Use
To set the resolution bandwidth (RBW) of each segment.
SPUR:BAND?
>
3000,3000,10000,10000,10000,10000,10000,10000,10000,1000
0,10000,10000,10000,10000,10000,10000,10000,10000,10000,
10000