Anritsu MS2840A - :CALCulate:TOI:FREQuency:BASE:LOWer <freq>; [:SENSe]:TOI:FREQuency:BASE:LOWer?

Chapter 2 SCPI Device Message Detail
2-826
[MS269xA]
2.25 GHz (MS2690A)
5.0625 GHz (MS2691A)
9.9375 GHz (MS2692A)
[MS2830A]
1.125 GHz (Option 040)
2.25 GHz (Option 041)
5.0625 GHz (Option 043)
9.9375 GHz (Option 044)
16.125 GHz (Option 045)
[MS2840A]
1.125 GHz (Option 040)
2.25 GHz (Option 041)
9.9375 GHz (Option 044)
16.125 GHz (Option 046)
Example of Use
To set the lower tone frequency to 1 GHz.
TOI:FREQ:BASE:LOW 1GHZ
Related Command
This command has the same function as the following command.
:CALCulate:TOI:FREQuency:BASE:LOWer <freq>
:CALCulate:TOI:FREQuency:BASE:LOWer <freq>
TOI Lower Tone Frequency
Function
This command sets the lower tone frequency for the TOI measurement.
Refer to
[:SENSe]:TOI:FREQuency:BASE:LOWer <freq>.
Related Command
This command has the same function as the following command.
[:SENSe]:TOI:FREQuency:BASE:LOWer <freq>
[:SENSe]:TOI:FREQuency:BASE:LOWer?
TOI Lower Tone Frequency Query
Function
This command queries the lower tone frequency for the TOI
measurement.
Query
[:SENSe]:TOI:FREQuency:BASE:LOWer?