Anritsu MS2840A - SEM:OFFS:LIST:DET;SEM:OFFS:LIST:DET?

Chapter
４
Native Device Message Details
4-236
SEM:OFFS:LIST:DET/SEM:OFFS:LIST:DET?
Spectrum Emission Mask Offset Detection Mode
Function
This command selects the detection type of the waveform pattern of the
offset for Spectrum Emission Mask measurement.
Command
SEM:OFFS:LIST:DET
mode_1[,mode_2[,mode_3[,mode_4[,mode_5[,mode_6[,mode_7[,
mode_8[,mode_9[,mode_10[,mode_11[,mode_12]]]]]]]]]]]
Query
SEM:OFFS:LIST:DET?
Response
mode_1,mode_2,mode_3,mode_4,mode_5,mode_6,mode_7,mode_8,
mode_9,mode_10,mode_11,mode_12
Parameter
mode_n
Selection of detection type of Offset-n
NORM
Detects positive and negative peaks
simultaneously.
POS
Positive peak detection
NEG
Negative peak detection
SAMP
Sampling detection
RMS|AVER
RMS detection
Example of Use
To set the detection type of the offset to POS (positive peak).
SEM:OFFS:LIST:DET
POS,POS,POS,POS,POS,POS,POS,POS,POS,POS,POS,POS
SEM:OFFS:LIST:DET?
> POS,POS,POS,POS,POS,POS,POS,POS,POS,POS,POS,POS