Anritsu MS2840A - :CALCulate:BPOWer|:TXPower:BANDwidth[:RESolution]:MODE?; :CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence <integer>

2.10 Burst Average Power
2-475
2
SCPI Device Message Details
:CALCulate:BPOWer|:TXPower:BANDwidth[:RESolution]:MODE?
Resolution Bandwidth Normal/CISPR Query
Function
This command queries the Resolution Bandwidth mode.
For details, refer to
[:SENSe]:BANDwidth|:BWIDth[:RESolution]:MODE?.
Related Command
This command has the same function as the following commands.
[:SENSe]:ACPower:BANDwidth[:RESolution]:MODE?
[:SENSe]:CHPower:BANDwidth[:RESolution]:MODE?
[:SENSe]:OBWidth:BANDwidth[:RESolution]:MODE?
[:SENSe]:BPOWer|:TXPower:BANDwidth[:RESolution]:MODE?
:CALCulate:BANDwidth|:BWIDth[:RESolution]:MODE?
:CALCulate:ACPower:BANDwidth[:RESolution]:MODE?
:CALCulate:CHPower:BANDwidth[:RESolution]:MODE?
:CALCulate:OBWidth:BANDwidth[:RESolution]:MODE?
:CALCulate:BPOWer|:TXPower:BANDwidth[:RESolution]:MODE?
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence
<integer>
Relative To
Function
This command sets the reference marker when the marker mode is set to
Delta.
Refer To
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence.
Related command
This command has the same function as the following commands.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerenc
e
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerenc
e
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerenc
e