Anritsu MS2840A - SEM:BAND:VID:AUTO;SEM:BAND:VID:AUTO?

Chapter
４
Native Device Message Details
4-219
4
Native Device Message Details
SEM:BAND:VID:AUTO/SEM:BAND:VID:AUTO?
Spectrum Emission Mask Video Bandwidth Auto/Manual
Function
This command sets the video bandwidth (VBW) in measuring the
reference power for Spectrum Emission Mask measurement.
Command
SEM:BAND:VID:AUTO switch_com
Query
SEM:BAND:VID:AUTO?
Response
switch_res
Parameter
switch_com
Automatic setting
ON|1
Enables the automatic setting function.
OFF|0
Disables the automatic setting function.
switch_res
Automatic
1
Enables the automatic setting function.
0
Disables the automatic setting function.
Details
The setting range of this function is limited depending on the settings of
other parameters. Refer to
MS2690A/MS2691A/MS2692A Signal
Analyzer Operation Manual (Spectrum Analyzer Function Operation)
or
MS2830A/MS2840A Signal Analyzer Operation Manual (Spectrum
Analyzer Function Operation)
for details.
Example of Use
To set the video bandwidth in measuring the reference power
automatically.
SEM:BAND:VID:AUTO ON
SEM:BAND:VID:AUTO?
> 1