2
SCPI Device Message Details
[:SENSe]:ACPower:CARRier[1]:RCARrier <integer>
Adjacent Channel Power Reference Carrier Select
Function
This command sets the reference carrier number for Adjacent Channel
Power measurement.
Command
[:SENSe]:ACPower:CARRier[1]:RCARrier <integer>
Parameter
<integer>
Reference carrier number
Range 1 to Carrier Number
Resolution 1
Suffix code None
Default 1
Example of Use
To set the reference carrier number of ACP measurement to 2.
ACP:CARR:RCAR 2
Related command
This command has the same function as the following command.
:CALCulate:ACPower:CARRier[1]:RCARrier
:CALCulate:ACPower:CARRier[1]:RCARrier <integer>
Adjacent Channel Power Reference Carrier Select
Function
This command sets the reference carrier number for Adjacent Channel
Power measurement.
Refer to
[:SENSe]:ACPower:CARRier[1]:RCARrier.
Related command
This command has the same function as the following command.
[:SENSe]:ACPower:CARRier[1]:RCARrier
To Next Page
Loading...
