Anritsu MS2840A - [:SENSe]:CORRection:NOISe:FLOor ON|OFF|1|0

2.23 Setting Noise Floor Reduction
2-1015
2
SCPI Device Message Details
[:SENSe]:CORRection:NOISe:FLOor ON|OFF|1|0
Noise Floor Reduction
Function
This command enables or disables the Noise Floor Reduction function.
Command
[:SENSe]:CORRection:NOISe:FLOor <switch>
Parameter
<switch>
Enables or disables Noise Floor Reduction
.
ON|1
Enables Noise Floor Reduction.
OFF|0
Disables Noise Floor Reduction.
Details
This command is available for MS2840A only when the option 051/151 is
installed.
Example of Use
To enable the Noise Floor Reduction function.
CORR:NOIS:FLO ON