Chapter 2 SCPI Device Message Details
2-450
Example of Use
To query the noise canceling function On/Off state.
BPOW:CORR:NOIS?
> 0
Related command
This command has the same function as the following command.
:CALCulate:BPOWer|:TXPower:CORRection:NOISe[:AUTO]?
:CALCulate:BPOWer|:TXPower:CORRection:NOISe[:AUTO]?
Noise Cancel Query
Function
This command queries the setting of the noise canceling function.
Refer to
[:SENSe]:BPOWer|:TXPower:CORRection:NOISe[:AUTO]?.
Related command
This command has the same function as the following command.
[:SENSe]:BPOWer|:TXPower:CORRection:NOISe[:AUTO]?
To Next Page
Loading...
