Anritsu MS2840A - [:SENSe]:SEMask:SWEep[1]:TIME:AUTO:MODE?

2.13 Spectrum Emission Mask
2-627
2
SCPI Device Message Details
[:SENSe]:SEMask:SWEep[1]:TIME:AUTO:MODE?
Spectrum Emission Mask Auto Sweep Time Select Query
Function
This command queries the sweep mode (Normal/Fast) when the
automatic sweep time setting function is enabled for measuring the
reference power during Spectrum Emission Mask measurement.
Query
[:SENSe]:SEMask:SWEep[1]:TIME:AUTO:MODE?
Response
<mode>
Parameter
<mode>
Normal/Fast of sweep time
NORM
Normal sweep mode
FAST
Fast sweep mode
Example of Use
To query the sweep mode when the automatic sweep time setting
function is enabled for measuring the reference power.
SEM:SWE:TIME:AUTO:MODE?
> FAST