Anritsu MS2840A - :CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:Y?; :CALCulate:BPOWer|:TXPower:MARKer:AOFF

2.10 Burst Average Power
2-469
2
SCPI Device Message Details
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:Y?
Marker Level Query
Function
This command queries the level at the marker point.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10[:PEAK]:Y?.
Related command
This command has the same function as the following commands.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10[:PEAK]:Y?
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:Y?
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:Y?
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:Y?
:CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:Y?
:CALCulate:BPOWer|:TXPower:MARKer:AOFF
All Marker Off
Function
This command sets all the markers to Off.
Refer to
:CALCulate:MARKer:AOFF.
Related command
This command has the same function as the following commands.
:CALCulate:MARKer:AOFF
:CALCulate:ACPower:MARKer:AOFF
:CALCulate:CHPower:MARKer:AOFF
:CALCulate:OBWidth:MARKer:AOFF