Anritsu MS2840A - :CALCulate:MARKer:PEAK:RESolution|EXCursion?

Chapter 2 SCPI Device Message Details
2-172
:CALCulate:MARKer:PEAK:RESolution|EXCursion?
Marker Peak Excursion Query
Function
This command queries the resolution when a peak point is detected.
Query
:CALCulate:MARKer:PEAK:RESolution|EXCursion?
Response
<rel_ampl>
(When Scale Mode is set to Log.)
<percent>
(When Scale Mode is set to Lin.)
Parameter
<rel_ampl>
Range 0.001 to 100.000 dB
Suffix code None. Value is returned in dB units.
Default 2 dB
<percent>
Range 0.01 to 100.00%
Suffix code None. Value is returned in % units.
Default 2%
Example of Use
To query the resolution.
CALC:MARK:PEAK:RES?
> 20.000