Anritsu MS2840A - [:SENSe]:CORRection:NOISe:FLOor?

Chapter 2 SCPI Device Message Details
2-1016.
[:SENSe]:CORRection:NOISe:FLOor?
Noise Floor Reduction Query
Function
This command queries the On/Off state of the Noise Floor Reduction
function.
Query
[:SENSe]:CORRection:NOISe:FLOor?
Response
<switch>
Parameter
<switch>
Noise Floor Reduction On/Off state
1
Noise Floor Reduction is On.
0
Noise Floor Reduction is Off.
Details
This command is available for MS2840A only when the option 051/151 is
installed.
Example of Use
To query the On/Off state of the Noise Floor Reduction function.
CORR:NOIS:FLO?
> 1