2
SCPI Device Message Details
[:SENSe]:CHPower:FREQuency:CENTer?
Channel Power Channel Center Frequency Query
Function
This command queries the center frequency for Channel Power
measurement.
Query
[:SENSe]:CHPower:FREQuency:CENTer?
Response
<freq>
Parameter
<freq>
Center frequency of channel
Range (Start Frequency) to (Stop Frequency)
Resolution 1 Hz
Suffix code None. Value is returned in Hz units.
Example of Use
To query the center frequency for Channel Power measurement.
CHP:FREQ:CENT?
> 6010000000
Related command
This command has the same function as the following command.
:CALCulate:CHPower:FREQuency:CENTer?
:CALCulate:CHPower:FREQuency:CENTer?
Channel Power Channel Center Frequency Query
Function
This command queries the center frequency for Channel Power
measurement.
Refer to
[:SENSe]:CHPower:FREQuency:CENTer?.
Related command
This command has the same function as the following command.
[:SENSe]:CHPower:FREQuency:CENTer?
To Next Page
Loading...
