Chapter 2 SCPI Device Message Details
2-162
:CALCulate:BANDwidth|:BWIDth:NDB:RESult?
N dB Bandwidth Result Query
Function
This command queries the measurement result for the N dB Bandwidth
measurement.
Query
:CALCulate:BANDwidth|:BWIDth:NDB:RESult?
Response
<freq>
Parameter
<freq>
N dB Bandwidth
Range
0.01 Hz to 3.7 GHz (MS2830A-040)
0.01 Hz to 6.1 GHz (MS2830A -041)
0.01 Hz to 13.6 GHz (MS2830A -043)
0.01 Hz to 26.6 GHz (MS2830A -044)
0.01 Hz to 43.1 GHz (MS2830A -045)
Resolution
0.01 Hz
Suffix code
None. Value is returned in Hz units.
–999999999999 is returned when no
measurement is performed, an error occurs, or N
dB Bandwidth is Off.
Details
This command is available only for MS2830A.
Example of Use
To query the measurement result for N dB Bandwidth.
CALC:BAND:NDB:RES?
> 10000000.00
To Next Page
Loading...
