Chapter 2 SCPI Device Message Details
2-170
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:MINimum:NEXT
Next Minimum Search
Function
This command searches for the next dip of the active marker and moves
the marker so that it becomes the center frequency of the zone marker.
Command
:CALCulate:MARKer[n]:MINimum:NEXT
Parameter
<n>
Marker Number
1
Specifies marker 1
2
Specifies marker 2
3
Specifies marker 3
4
Specifies marker 4
5
Specifies marker 5
6
Specifies marker 6
7
Specifies marker 7
8
Specifies marker 8
9
Specifies marker 9
10
Specifies marker 10
When omitted: Specifies marker 1
Details
This command is not available during Spurious Emission measurement
and when Displayed Segment Mode is Auto.
Not available during Spectrum Emission Mask measurement.
Example of Use
To move the marker 1 to the next dip.
CALC:MARK:MIN:NEXT
Related Command
This command has the same function as the following command.
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MINimum:
NEXT
To Next Page
Loading...
