Anritsu MS2840A - [:SENSe]:TOI:FREQuency:IM3:SEARch ON|OFF|1|0; :CALCulate:TOI:FREQuency:IM3:SEARch ON|OFF|1|0

Chapter 2 SCPI Device Message Detail
2-842
[:SENSe]:TOI:FREQuency:IM3:SEARch ON|OFF|1|0
TOI 3rd Frequency Search On/Off
Function
This command turns on and off the search function for the third-order
distortion frequency in the TOI measurement.
Command
[:SENSe]:TOI:FREQuency:IM3:SEARch <switch>
Parameter
<switch>
Setting of the search function for the third-order
distortion frequency in the TOI measurement
ON|1
Turns on the search function for the third-order
distortion frequency.
OFF|0
Turns off the search function for the third-order
distortion frequency. (Default)
Example of Use
To turn on the search function for the third-order distortion frequency.
TOI:FREQ:IM3:SEAR 1
Related Command
This command has the same function as the following command.
:CALCulate:TOI:FREQuency:IM3:SEARch
:CALCulate:TOI:FREQuency:IM3:SEARch ON|OFF|1|0
TOI 3rd Frequency Search On/Off
Function
This command turns on and off the search function for the third-order
distortion frequency in the TOI measurement.
Refer to
[:SENSe]:TOI:FREQuency:IM3:SEARch.
Related Command
This command has the same function as the following command.
[:SENSe]:TOI:FREQuency:IM3:SEARch