Anritsu MS2840A - RESPOWER?

Chapter
４
Native Device Message Details
4-199
4
Native Device Message Details
RESPOWER?
Power Marker Result Query
Function
This command queries the measurement results of the power marker
function.
Query
RESPOWER? type
Response
pow1,den1
When type is MKR
pow1
Total power (/Zone) in zone marker range
Returns *** when Marker Mode is set to Fixed
or Off. Returns *** when Zone Width Type is
Spot.
den1
Power density (/Hz) in zone marker range
Returns *** when Marker Mode is set to Fixed
or Off.
Returns *** when Zone Width Type is Spot.
pow2,den2
When type is REFMKR
pow2
Total power(/Zone) in the range of the zone
marker of the marker set by Relative to.
Returns *** when the marker set by Relative To
is set to Fixed or Off.
Returns *** when Zone Width Type of the
marker set by Relative To.
Returns *** when Marker Mode is set to other
than Delta.
Returns *** when Zone Width Type is set to
Spot.
den2
Power density(/Hz) in the range of the zone
marker of the marker set by Relative To.
Returns *** when Marker Mode of the marker
set by Relative To is set to Fixed or Off.
Returns *** when Zone Width Type of the
marker set by Relative To is set to Spot.
Returns *** when Marker Mode is set to other
than Delta
Returns *** when Zone Width Type is set to
Spot.