Anritsu MS2840A - MKPK

Chapter
４
Native Device Message Details
4-166
MKPK
Peak Search
Function
This command searches for the peak point of the active trace and moves
the marker point to it.
Command
MKPK
MKPK move
Parameter
move
Peak point type
HI
Moves to the highest peak point.
NH
Moves to the peak point below the level
of the active marker.
When omitted: Moves to the highest level point.
Details
This command is not available during the Spurious Emission
measurement and when Displayed Segment Mode is set to Auto.
This command is disabled during the Spectrum Emission Mask
measurement.
Example of Use
To move the marker to the next peak point.
MKPK