Anritsu MS2840A - CALC:SPUR:LIM:ABS:DATA:STOP:AUTO;CALC:SPUR:LIM:ABS:DATA:STOP:AUTO?

Chapter
４
Native Device Message Details
4-62
CALC:SPUR:LIM:ABS:DATA:STOP:AUTO/CALC:SPUR:LIM:ABS:DATA:STO
P:AUTO?
Spurious Emission Limit Stop Level Auto/Manual
Function
This command sets the absolute level limit of the stop frequency in each
segment for the Spurious Emission measurement to Auto/Manual.
Command
CALC:SPUR:LIM:ABS:DATA:STOP:AUTO
switch_1_com,switch_2_com,switch_3_com,switch_4_com,swit
ch_5_com,switch_6_com,switch_7_com,switch_8_com,switch_9
_com,switch_10_com,switch_11_com,switch_12_com,switch_13
_com,switch_14_com,switch_15_com,switch_16_com,switch_17
_com,switch_18_com,switch_19_com,switch_20_com
Query
CALC:SPUR:LIM:ABS:DATA:STOP:AUTO?
Response
switch_1_res,switch_2_res,switch_3_res,switch_4_res,swit
ch_5_res,switch_6_res,switch_7_res,switch_8_res,switch_9
_res,switch_10_res,switch_11_res,switch_12_res,switch_13
_res,switch_14_res,switch_15_res,switch_16_res,switch_17
_res,switch_18_res,switch_19_res,switch_20_res
Parameter
switch_n_com
Stop frequency of Segment n Auto//Manual
ON|1
Stop frequency is set to Auto.
OFF|0
Stop frequency is set to Manual.
switch_n_res
Stop frequency of Segment n Auto//Manual
1
Stop frequency is set to Auto.
0
Stop frequency is set to Manual.
Details
When set to On, the same as the value set in Limit Start Level is set to
Limit Stop Level.