Chapter
４
Native Device Message Details
4-164
MKN/MKN?
Zone Marker Frequency (Time)
Function
This command moves the center of the zone marker to the specified
frequency (time).
Command
MKN freq,marker
MKN time,marker
Query
MKN? marker
Response
freq
A value without a suffix code that has a resolution of 0.01 Hz is
returned.
time
A value without a suffix code that has a resolution of 0.01
µ
s is
returned.
Parameter
freq
Center frequency of zone maker
Range
[MS269xA]
–100 MHz to 6.0 GHz (MS2690A)
–100 MHz to 13.5 GHz (MS2691A)
–100 MHz to 26.6 GHz (MS2692A)
[MS2830A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 13.6 GHz (Option 043)
–100 MHz to 26.6 GHz (Option 044)
–100 MHz to 43.1 GHz (Option 045)
[MS2840A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 26.6 GHz (Option 044)
–100 MHz to 44.6 GHz (Option 046)
Resolution 0.01 Hz
Suffix code HZ, KHZ, KZ, MHZ, MZ, GHZ, GZ
Hz is used when omitted.
time
Range –1000 to 1000 s
Resolution 1 ns
To Next Page
Loading...
