Anritsu MS2840A - [:SENSe]:POWer[:RF]:GAIN[:STATe]?

Chapter 2 SCPI Device Message Details
2-74
Details
[MS269xA]
This command is fixed to Off and cannot be set when the Option 008/108
6 GHz Preamplifier is not installed.
[MS2830A]
This command is fixed to Off and cannot be set when the Option
008/108/068/168 Preamplifier is not installed.
[MS2840A]
This command is fixed to Off and cannot be set when the Option
008/108/068/168/069/169 Preamplifier is not installed.
[Common]
This is not available when Spurious Emission is On, and Gate View is
Off.
Example of Use
To set Pre Amp to On.
POW:GAIN ON
[:SENSe]:POWer[:RF]:GAIN[:STATe]?
Pre Amp Query
Function
This command queries the On/Off state of the Pre-amplifier.
Query
[:SENSe]:POWer[:RF]:GAIN[:STATe]?
Response
<switch>
Parameter
<switch>
Pre-amplifier On/Off
1
On
0
Off (Default value)
Example of Use
To query the On/Off state of the Pre-amplifier.
POW:GAIN?
> 1