Anritsu MS2840A - CONF:SAN; CONF:SEM

Chapter
４
Native Device Message Details
4-71
4
Native Device Message Details
CONF:SAN
Measurement Off
Function
This command disables currently running Measurement function. No
operation is made if no Measurement function is running.
Command
CONF:SAN
Example of Use
To disable the currently running Measure function.
CONF:SAN
CONF:SEM
Spectrum Emission Mask Configure
Function
This command sets Spectrum Emission Mask measurement to On.
Command
CONF:SEM
Details
No measurement is performed.
Example of Use
To set SEM measurement to On.
CONF:SEM