Anritsu MS2840A - [:SENSe]:SPURious:AVERage[:STATe] ON|OFF|1|0; [:SENSe]:SPURious:AVERage[:STATe]?

2.14 Spurious Emission Measurement Function
2-803
2
SCPI Device Message Details
[:SENSe]:SPURious:AVERage[:STATe] ON|OFF|1|0
Spurious Emission Storage Mode
Function
This command sets the storage mode of Trace A.
Refer to
:TRACe[1]|2|3|4|5|6:STORage:MODE.
Related Command
This command has the same function as the following commands.
:TRACe[1]|2|3|4|5|6:STORage:MODE
[:SENSe]:ACPower:AVERage[:STATe]
[:SENSe]:CHPower:AVERage[:STATe]
[:SENSe]:OBWidth:AVERage[:STATe]
[:SENSe]:SEMask:AVERage[:STATe]
[:SENSe]:BPOWer|:TXPower:AVERage[:STATe]
[:SENSe]:SPURious:AVERage[:STATe]?
Spurious Emission Storage Mode Query
Function
This command queries the storage mode of Trace A.
Refer to
:TRACe[1]|2|3|4|5|6:STORage:MODE?.
Related Command
This command has the same function as the following commands.
:TRACe[1]|2|3|4|5|6:STORage:MODE?
[:SENSe]:ACPower:AVERage[:STATe]?
[:SENSe]:CHPower:AVERage[:STATe]?
[:SENSe]:OBWidth:AVERage[:STATe]?
[:SENSe]:SEMask:AVERage[:STATe]?
[:SENSe]:BPOWer|:TXPower:AVERage[:STATe]?