Anritsu MS2840A - Chapter 4 Native Device Message Details

Chapter 4 Native Device Message Details
4-1
4
Native Device Message Details
This chapter describes detailed specifications on remote control
commands for executing functions of this application in alphabetical
order. Refer to the
MS2690A/MS2691A/MS2692A and
MS2830A/MS2840A Signal Analyzer Operation Manual (Mainframe
Remote Control)
for detailed specifications on IEEE488.2 common device
messages and application common device messages.
Some functions of this instrument only correspond to SCPI commands.
You can perform a remote control of the function in Native mode by
replacing the corresponding SCPI commands with Native commands.
Refer to section 1.6.2 “How to use SCPI commands in Native mode” in
the
MS2690A/MS2691A/MS2692A and MS2830A/MS2840A Signal
Analyzer Operation Manual (Main unit Remote Control)
for replacement.
Also refer to Chapter 2 “SCPI Device Messages” for detailed
specifications on SCPI commands.
ACTIVETRACE/ACTIVETRACE? ......................................... 4-10
ADJCARRIERCNT/ADJCARRIERCNT? .............................. 4-11
ADJCARRIERNUM/ADJCARRIERNUM?............................. 4-12
ADJCARRIERSPAC/ADJCARRIERSPAC? ......................... 4-13
ADJCHBW/ADJCHBW? ....................................................... 4-14
ADJCHSP/ADJCHSP?.......................................................... 4-15
ADJCHSPF/ADJCHSPF? ..................................................... 4-16
ADJCHSPFF/ADJCHSPFF? ................................................. 4-17
ADJFILTERTYPE/ADJFILTERTYPE? .................................. 4-18
ADJINBW/ADJINBW? ........................................................... 4-19
ADJOFFSET1/ADJOFFSET1? ............................................. 4-20
ADJOFFSET2/ADJOFFSET2? ............................................. 4-21
ADJOFFSET3/ADJOFFSET3? ............................................. 4-22
ADJPWRTYPE/ADJPWRTYPE? .......................................... 4-23
ADJROF/ADJROF? .............................................................. 4-24
ALLMKPK? ............................................................................ 4-25
AMD/AMD? ........................................................................... 4-26
AT/AT? .................................................................................. 4-27
AUNITS/AUNITS? ................................................................. 4-28
BAND:MODE/BAND:MODE? ............................................... 4-29
BAPWRSTART/BAPWRSTART? ......................................... 4-30
BAPWRSTOP/BAPWRSTOP? ............................................. 4-31
BMD/BMD? ........................................................................... 4-32
BNDC/BNDC? ....................................................................... 4-33
BNDSP/BNDSP? .................................................................. 4-34
CAL .................................................................................... 4-35
CAL:RCL/CAL:RCL? ............................................................. 4-36