Anritsu MS2840A - :CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer; :CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer:NEXT

2.9 ACP
2-417
2
SCPI Device Message Details
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer
Power Peak Search
Function
This command moves the active marker to the position with peak total
power in the active marker zone in the measurement band.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer
Related command
This command has the same function as the following command.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:
POWer
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:
POWer:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|
9|10:MAXimum:POWer
:CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum
:POWer
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer:NEXT
Next Power Peak Search
Function
This command searches for the next largest peak power in the zone
width compared to the total power of the zone with the active marker in
the measurement band and moves the active marker.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer:NE
XT
Related command
This command has the same function as the following command.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer:NE
XT
:CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum
POWer:NEXT