Anritsu MS2840A - :FETCh:BPOWer|:TXPower[n]?

Chapter 2 SCPI Device Message Details
2-456
:FETCh:BPOWer|:TXPower[n]?
Burst Average Power Fetch
Function
This command outputs the measurement result for Burst Average Power
measurement.
Query
:FETCh:BPOWer|:TXPower[n]?
Response
When the result mode is “A”.
<power>
(n=1 or when omitted)
When the result mode is “B”.
<sweep_time>,<power>,<power>,<trace_point>,
-999.0,-999.0,-999.0,-999.9,
<burst_time>,-999.0
(n=1 or when omitted)
<tracedata_1>,<tracedata_2>,<tracedata_3>,
......
(n=2)
Parameter
<sweep_time>
Sweep Time
<burst_time>
Length of Burst Average Power measurement
range
No suffix code, s units, 1 ns resolution
–999999999999 is returned when no
measurement is executed.
<power>
Average power in burst
When Scale Mode is Log.
Log Scale Unit units (however, dBm in V and
µ
W
in W
)
Returns a value without a suffix code.
<tracedata_n>
Trace data in n point
No suffix code, dBm units, 0.001 dB resolution
–999.0 is returned when no measurement is
executed.
<trace_point>
Number of trace display points
No suffix code
–999.0 is returned when no measurement is
executed.