Anritsu MS2840A - :CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence <integer>; :CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence?

2.14 Spurious Emission Measurement Function
2-813
2
SCPI Device Message Details
:CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence <integer>
Spurious Emission Relative To
Function
This command sets the reference marker when the marker mode is set to
Delta.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence.
Related Command
This command has the same function as the following commands.
:CALCulate:ACPower:MARKer[n]:REFerence
:CALCulate:CHPower:MARKer[n]:REFerence
:CALCulate:OBWidth:MARKer[n]:REFerence
:CALCulate:BPOWer|:TXPower:MARKer[n]:REFerence
:CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence?
Spurious Emission Relative To Query
Function
This command queries the reference when the marker mode is set to
Delta.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence?.
Related Command
This command has the same function as the following commands.
:CALCulate:ACPower:MARKer[n]:REFerence?
:CALCulate:CHPower:MARKer[n]:REFerence?
:CALCulate:OBWidth:MARKer[n]:REFerence?
:CALCulate:BPOWer|:TXPower:MARKer[n]:REFerence?