Anritsu MS2840A - [:SENSe]:SEMask:BANDwidth[1]:CHANnel|:INTegration <bandwidth>

Chapter 2 SCPI Device Message Details
2-592
[:SENSe]:SEMask:BANDwidth[1]:CHANnel|:INTegration <bandwidth>
Spectrum Emission Mask Integrate Bandwidth
Function
This command sets the measurement bandwidth of the reference power
for Spectrum Emission Mask measurement.
Command
[:SENSe]:SEMask:BANDwidth[1]:CHANnel|:INTegration
<bandwidth>
Parameter
<bandwidth>
Measurement bandwidth of reference power
Range 1000 to 200000000 Hz
Resolution 1 Hz
Suffix code HZ,KHZ,KZ,MHZ,MZ,GHZ,GZ
Hz is used when omitted.
Example of Use
To set the measurement bandwidth of the reference power to 5 MHz.
SEM:BAND:CHAN 5MHZ