Anritsu MS2840A - [:SENSe]:CHPower:SWEep:TIME?; [:SENSe]:CHPower:SWEep:TIME:AUTO OFF|ON|0|1

Chapter 2 SCPI Device Message Details
2-524
[:SENSe]:CHPower:SWEep:TIME?
Sweep Time Query
Function
This command queries the sweep time.
Refer to
[:SENSe]:SWEep:TIME?.
Related command
This command has the same function as the following commands.
[:SENSe]:SWEep:TIME?
[:SENSe]:ACPower:SWEep:TIME?
[:SENSe]:OBWidth:SWEep:TIME?
[:SENSe]:BPOWer|:TXPower:SWEep:TIME?
[:SENSe]:CHPower:SWEep:TIME:AUTO OFF|ON|0|1
Sweep Time Auto/Manual
Function
This command enables/disable the automatic sweep time setting
function.
Refer to
[:SENSe]:SWEep:TIME:AUTO.
Related command
This command has the same function as the following commands.
[:SENSe]:SWEep:TIME:AUTO
[:SENSe]:ACPower:SWEep:TIME:AUTO
[:SENSe]:OBWidth:SWEep:TIME:AUTO