Anritsu MS2840A - [:SENSe]:SPURious[:RANGe][:LIST]:SWEep:TIME?

Chapter 2 SCPI Device Message Detail
2-758
[:SENSe]:SPURious[:RANGe][:LIST]:SWEep:TIME?
Spurious Emission Sweep Time Query
Function
This command queries the sweep time of each segment.
Query
[:SENSe]:SPURious[:RANGe][:LIST]:SWEep:TIME?
Response
<seconds_n>
Parameter
<seconds_n>
Range
[MS269xA]
2 ms to 1000 s
[MS2830A]
1 ms to 1000 s
[MS2840A]
1 ms to 1000 s
Suffix code None. Value is returned in S units.
Example of Use
To query the sweep time of each segment.
SPUR:SWE:TIME?
>
0.100000,0.100000,0.100000,0.100000,0.100000,0.100000,0.
100000,0.100000,0.100000,0.100000,0.200000,0.300000,0.10
0000,0.100000,0.100000,0.100000,0.100000,0.100000,0.1000
00,0.100000